How to install the high efficiency filter? The characteristics of the high efficiency filter?
Release time:
2021-11-01
How to install the high efficiency filter as an important part of the purification air conditioning system and clean room? Before installation, the high efficiency filter should be fully cleaned, and at the same time, a comprehensive liquidation of the purification workshop, such as the use of vacuum cleaners to suck the dust inside the workshop, can not use ordinary vacuum cleaners, need to wear ultra-clean filter bags of vacuum cleaners. If it is installed on the ceiling, it should also be cleaned in the ceiling. The high-efficiency filter can be installed only after the workshop is cleaned after 12 hours of operation.high efficiency filterThe disassembly can only be carried out at the installation site. After straightening, the appearance should be checked, and each high-efficiency filter should be required to have specific parameters of performance indicators. Next, the small editor will talk about the characteristics of high-efficiency filters.
High efficiency filter, as the name implies, is a kind of equipment that can filter external impurities. At the same time, the filtration accuracy is relatively high, and its removal rate of suspended solids in water can reach more than 95%. For some relatively large molecular organic matters, Bacterial viruses, colloidal iron and other impurities also have certain removal effects, and the treated water after good coagulation treatment can also fully remove internal impurities.high efficiency filterThe filtration speed is relatively high, and it can reach 40 meters per hour in the general use process, which is more than three times that of ordinary filters. The amount of pollution is relatively large, and the impurities that can withstand 15 to 35 kilograms per cubic meter are more than 4 of the ordinary filters. The high-efficiency filters can be used repeatedly, and the demand for water consumption is not large.
Because of the filter bed structure of this equipment and the characteristics of the filter material itself, the amount of glue of the storage agent is about half of the conventional technology, and the increase of the periodic water yield, the operating cost of water will also be reduced, thus reducing the cost of operation. When the high-efficiency filter is used to produce the same clean water, its floor area is only about 1/3 of that of ordinary equipment, and its internal filter material foundation is durable, and its service life can even be as high as 20 years.
Inhigh efficiency filterFlocculant is added to the circulating water in the pump. After the raw water is pressurized by the booster pump, the flocculant is uniformly mixed by the impeller of the water pump to suspend fine solid particles in the raw water and carry out micro-flocculation reaction with colloidal substances, so that flocs with a volume greater than 5 microns can be quickly generated. And flow through the filtration system pipeline into the high-efficiency asymmetric fiber filter, the flocs are filtered by the filter media retention. In the high efficiency filter, air and water are used for combined flushing, backwashing air is provided by the fan, and backwashing water is provided directly by tap water. And the system's wastewater (high-efficiency automatic gradient density fiber filter backwashing wastewater) can be discharged into the sewage treatment system.
Latest News
What is the role of chemical filters?
2023-01-11
Basic overview of chemical filters
2023-01-03
Yantair Co.,Ltd.
-Address: No.3 Baoyuan Road,Laishan District,Yantai City
-Zip Code: 264003
-Tel: 086-535-6715398
-Email: helen.sun@yantair.com
-Fax: 086-535-6715566
-Website: http://www.yantair.com
SAF Coolest v1.3.1.2 设置面板 UDUSX-ZHHP-VVSAE-ZXQ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page