"High efficiency filter", clean life!
Release time:
2020-11-02
The current high-efficiency filter is based on the original ordinary filter, the introduction of the filtering effect is more efficient products, it can filter out the particle dust and various suspended solids below 0.5um, so it is usually the end of the filtration system. Therefore the currenthigh efficiency filterThere are many materials, and sometimes they are used together with some stainless steel and other materials. However, the filter is also an industrial consumable, so in order to ensure the cleaning effect, it is generally replaced every once in a while. Usually, when the dust accumulated on the high-efficiency filter is too much, the resistance increases. When the resistance is large enough to affect the normal air supply, the filter should be replaced. However, there is a small method. When the filtering area of the high-efficiency filter is increased or the number of filters is increased, the service life of the high-efficiency filter can be effectively extended. However, the operating space of this approach is not large, because it is impossible to increase the filter area indefinitely, so to fundamentally extend the use time of the high-efficiency filter is to block the dust in the pre-filter.
However, everything is not absolute. In some cases, yeshigh efficiency filterThe time of use is not only due to the consideration of resistance, but there are other factors. For example, if the workshop air conditioner is not a brand-new air system, the filter paper in the high-efficiency filter will be corroded by the return air at this time, so for safety reasons, it must be replaced regularly.
When transporting and storing the "high efficiency filter", it should be placed in the direction of the manufacturer's logo. Especially in the process of transportation should pay attention to light, so that it can prevent severe vibration and collision, effectively reduce the cause of man-made damage. Before installing the high efficiency filter, the clean room must be cleaned and wiped. If there is dust inside the clean air conditioning system, it must be cleaned and wiped again until the cleaning requirements are met. If it is to be installed in the technical interlayer and suspended ceiling, it is necessary to thoroughly clean and wipe the inside of the technical interlayer or suspended ceiling. For clean rooms and clean air conditioning systems that meet the cleaning requirements, the clean air conditioning system must be tested first. Only when the high-efficiency filter reaches continuous operation for more than 12 hours, clean the clean room again, and then install the high-efficiency filter again.
Latest News
What is the role of chemical filters?
2023-01-11
Basic overview of chemical filters
2023-01-03
Yantair Co.,Ltd.
-Address: No.3 Baoyuan Road,Laishan District,Yantai City
-Zip Code: 264003
-Tel: 086-535-6715398
-Email: helen.sun@yantair.com
-Fax: 086-535-6715566
-Website: http://www.yantair.com
SAF Coolest v1.3.1.2 设置面板 UDUSX-ZHHP-VVSAE-ZXQ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page